Products
SKIMCOAT AND RENDERING MORTAR
TILE ADHESIVE
WATERPROOFING COATING
WATERPROOFING CEMENTITIOUS
SEALANT AND ADDITIVES
FLOORING AND SURFACE PROTECTION
REPAIRING AND GROUTING
FACADE DECORATION AND PROTECTION
Is a smooth skim rendering paste for thickness 0.3 to 4.0mm to be mixed with cement or gypsum for eliminating grooves, seams and rock pockets in surfaces to obtain a perfectly smooth finish.
Coverage: 0.6 - 0.8kg/m2/2 coats Packaging: 5kg and 20kg pails
Is a ready-to-use smooth skim rendering paste for thickness 0.3 to 4.0mm used to level surface defects in concrete or render.
Coverage: 0.8 - 1.0kg/m2/2 coats Packaging: 5kg and 20kg pails
Is a smooth powder skimcoat for repair of concrete or render surface defects. Surface blemishes such as grooves, seams, fine cracks and rock pockets can be eliminated producing a smooth finish.
Interior and exterior walls and ceilings
Coverage: 20 - 24 sqm @ 1mm thickness Packaging: 20kg bag
LANKO 111 RENDER COARSE is a coarse rendering mortar for finishes ranging from 10mm to 50mm. This product is applicable in repairing concrete surface defects and as replacement for traditional plastering for walls and ceilings.
Coverage: 1.1 m2/25kg at 20mm application thickness Packaging: 25kg bag Shelf Life: Store in a cool dry place. If properly stored in its unopened container, product life is 12 months.
Is a fine rendering mortar for the repair of surface defects on concrete panels or traditional renders of walls or ceilings with thickness of 2mm to 10mm.
Coverage: 1.3kg/m2/mm Packaging: 25kg bag
Is a cement-free, polymer-based, joint and internal skimming compound. It only requires addition of water on site to give a smooth and homogeneous paste when mixed by hand or electric mixer.
Coverage: 7.5 to 8.5m2 at 1.0mm thickness. Packaging: 20kg bag
Is an economical thick or thin bed (TTB) cement-based tile adhesive, ideal for laying the following tile types: ceramic tiles, baked clay tiles, quarry and most monocottura tiles unto interior and exterior walls and floors.
Packaging: 25kg bag
Is an economical thick or thin bed (TTB) cement-based tile adhesive, ideal for laying tiles especially ceramic, baked clay tiles, quarry and monocottura tiles unto interior and exterior walls and floors.
Is a high quality, thick or thin bed (TTB) cement-based tile adhesive, the ideal partner for fixing ceramic, quarry, slate, marble, homogenous, low-porous porcelain and most monocottura tiles.
Is a premium grade, thick or thin bed, fast-setting, grey cement-based tile adhesive specifically formulated to provide higher coverage, easier application, longer open time and extra high bond strength. It has superior water resistance and low shrinkage capability.
A premium grade cementitious grout which is designed for use with most types of ceramic tile and natural stone.
Coverage: Varies depending on tile size and thickness. Packaging: 2kg plastic bag
Is used as a primer, sealer and bonding agent to prepare floor surfaces prior to the application of waterproofing membrane & wall-coating system.
Coverage: Approximately 5 – 10m2 per liter Packaging: 20 Litre containers
DAVCO K10 GRS 2000 is a root-resistant polyurethane elastomeric waterproofing membrane. This liquid-applied product prevents vegetation from perforating the waterproofing ensuring the protection of the substrate.
Is a flexible single-pack water-based waterproofing and sealing membrane for internal or external waterproofing of facades, terraces, concrete roofs, balconies and wet areas.
Coverage: 0.7L/m2/coat Packaging: 4L and 16L
Description DAVCO K10 PREMIUM is a liquid-applied polyurethane-containing elastomeric seamless waterproofing membrane. Moisture-cured characteristics ensures that further works can be carried out at a shorter time once the membrane has dried out.
Is a heat shielding and waterproofing coating that uses advanced insulation technology to reduce the interior temperature of buildings. It is ideally used for roofs and walls in both commercial and residential buildings.
Coverage: Flat Roofs: 500 micron dry film thickness i.e. 1.1 sq.metre/litre Pitched Roofs: 370 micron dry film i.e. 1.5 sq.metre/litre Walls (smooth): 250 micron dry film i.e. 2.2 sq.metre/litre Packaging: 20 Litre pail
Is a liquid acrylic waterproofing membrane for roofs and facades. Applied in a thick layer, the paint forms a waterproof, flexible film which adapts to the surface changes caused by tension or expansion. A 2-coat DAVCO K10 Sovacryl membrane application forms a microporous surface which is sufficient to protect external surface from water seepage and deterioration due to carbonation, acid or chemical attack or other types of environment pollution.
Coverage: 0.7 L/m2/coat Packaging: 4L, 16L and 20L pail
DAVCO CAPTAIN SHIELD is a cement waterproofing compound formulated to deliver long-term protection from water ingress for more lasting structures. It is an admixture used for concrete structures or cement plasters. Backed up by DAVCO's global quality and innovation that creates protective layer that blocks water. Its Water Guard Technology provides the three main benefits:
Is a dual-component flexible cementitious mortar used for protection and waterproofing of rendered concrete and masonry especially water reservoirs, tanks, shaft linings, lift shafts, and under-tile sealants for swimming pools and damp premises.
Coverage: 1.0-1.5kg/m2/coat Packaging: 4.5kg pail set and 23kg set
Is a ready to mix waterproofing mortar for the protection of masonry and concrete structures. Ideal for use on below grade masonry structures such as basements, cellar walls, foundations, underground car parks, water basins, etc.
Coverage: Substrate moisture content DAVCO K11 Concentrate Ground moisture 2 – 2.5 kg/m2 Hydrostatic pressure 3 – 3.5 kg/m2 All application shall be carried out in a minimum of 2 coats unless otherwise stated by the manufacturer. Packaging: 25kg bag
Is a two component alkali-reactive (crystallization process) waterproofing system that forms a slightly flexible waterproofing membrane capable of bridging cracks and withstand hydrostatic pressure. Ideal for below grade surfaces against concrete decay and water borne corrosive salts.
Coverage: Ground Moisture 1.0 – 2.0 kg/m2 Hydrostatic Pressure (+side) 2.5 – 3.5 kg/m2 Hydrostatic Pressure (-side) 4.0 – 5.0 kg/m2 Packaging: 34kg Set (Part A Powder 25kg and Part B Bonding Agent 9kg)
Is an ultra-fast setting hydraulic mortar that puts a stop to leaks by hardening within 45-90 seconds while increasing in volume. It offers long-term protection against recurring water leakage on the plugged area.
Coverage: 1.7kg of powder produces 1 liter of workable mortar Packaging: 1kg and 5kg bucket
Is a cementitious waterproofing system for the protection of concrete structures by crystallization. For use on interior and exterior below grade surfaces.
Coverage: 1 – 1.5kg/sq.meter/coat Packaging: 25kg bag
Is a two component flexible hydraulic micro mortar for the protection and waterproofing of masonry and concrete structures. Ideal for immersed areas such as large swimming pools, reservoirs, balconies and terraces.
Coverage: 3 – 4 kg/m2 per 2 coats Packaging: 34kg Set (Part A Powder 23kg and Part B Bonding Agent 10 Liters)
Is a single-component polyurethane sealant used to seal and bridge joints between traditional masonry, concrete structures, prefabricated elements, metal constructions, stone, brick, PVC, glass, roof and ceramic tiles, glass, wood work and aluminum. It is best for joints subject to movement.
Coverage: One sausage fills 6m long of 1cm x 1cm gap Packaging: 600ml sausage and 310ml cartridge
Is a bonding primer which creates a bonding key on smooth, sealed or porous substrates. It increases bonding strength while reducing the absorption capacity of the substrate.
Coverage: 0.2 L/m2 Packaging: 5 and 20 Liter containers
Is a ready-to-wet self-levelling screed for preparing old and new interior and exterior floors before applying or laying carpet, vinyl sheeting, tiles, parquet, rubber or floor paints. Application thickness is from 7 mm to 20 mm.
Coverage: 1.8 kg/m2/mm Packaging: 25kg bag
Is a self-levelling screed for old and new interior floors. Application thickness is between 3 mm and 8 mm. It is a ready-to-wet mortar for preparing substrates before laying thin floor coverings. Lanko 173 can be covered with most floor coverings.
Coverage: 1.6 kg/m2/mm Packaging: 25kg bag
Is a liquid floor hardener for sealing and dustproofing powdery or friable concrete and masonry surfaces.
Coverage: Will depend on the texture and porosity of the surface. As a guide, one liter will cover 6m2 on porous surfaces and up to 12m2 on dense, smooth surfaces. Packaging: 5 and 20 liter containers
Is a non-metallic floor hardener that provides protection against abrasion of carparks, industrial factories, power stations, loading areas, warehouses, steel mills and department stores.
Coverage: 3 - 7 kg/m2 Packaging: 25kg bag
Is a cementitious coating ideal for carparks and industrial floorings. It is a two-component high performance mortar resistant to abrasion, impact and skidding. Application thickness is 3 – 5 mm.
Coverage: Will depend on the texture and porosity of the surface Packaging: 30kg set
Is a pre-mixed, cementitious, non-shrink, high-strength grout.
Is a high strength Class A structural grout for most normal grouting installations. Gaseous expansion in the plastic state ensures positive contact
Packaging: 20kg bag
Is a cementitious non-shrink grout which is specially formulated to have a lower embodied carbon footprint. It has high fluidity and is ideal for grouting requiring only on-site addition of water to provide a non-shrink free flowing grout
Is a fast-setting repair mortar for roads and floors.
Is a fibre-reinforced non-shrink mortar for repair of concrete structures and reinforcement of weakened structures with application thickness of 5mm to 50mm.
Coverage: 2 kg/m2/mm Packaging: 25kg bag
Is a fibre-reinforced non-shrink mortar for repair and structure concrete facades. Application may be from 1 mm to 35 mm thickness.
Is a bonding agent for cement based coats. This synthetic resin emulsion significantly improves the performance of mortar and concrete even on smooth substrates.
Packaging:
Coverage (per coating):
DAVCO Standard Tile Grout is a cementitious tile grout designed for use with most types of ceramic tile and natural stones It has a anti-microbial protection providing resistance to a broad spectrum of molds, fungi and bacteria Advantages
Is a durable cement-based mineral coating for interior and exterior decorative facades. It comes in ready to mix powder form.
Coverage: Coverage will depend on the substrate thickness and texture of application. Approximately coverage is 8 – 10m2. Packaging: 25 kg bag
PRODUCT CALCULATOR
Step 1: Select your Product
Step 2: Enter your specification
Step 3: Calculate how much you need
***Estimated quantities shall serve only as a guide. Product coverage varies according to actual substrate conditions and the product thickness acquired.